Dell 7000 manual 03*&DUG

03(*￿￿￿&DUG

This section provides the removal procedure for the MPEG-2 card, if present.

carrier tray (MPEG-2 card inside)

)LJXUH￿￿￿￿￿￿￿￿03(*￿￿￿&DUG￿5HPRYDO

To remove the MPEG-2 card, follow these steps (see Figure 4-29):

1.Gently pull the carrier tray off of connector JP19 on the system board. Do not rock the card to remove it, because this may damage the connectors.

2.Remove the carrier tray by sliding it toward the back of the computer

3.Remove the MPEG-2 card from the carrier tray.

Removing and Replacing Parts 4-45