Back to Contents Page

Battery

Dell™ OptiPlex™ 760 Service Manual

Replacing the Battery

Replacing the Battery

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

A coin-cell battery maintains computer configuration, date, and time information. The battery can last several years.

The battery may need replacing if an incorrect time or date is displayed during the boot routine along with a message such as:

Time-of-day not set - please run SETUP program

or

Invalid configuration information - please run SETUP program

or

Strike the F1 key to continue,

F2 to run the setup utility

To determine whether you need to replace the battery, reenter the time and date in system setup and exit the program to save the information. Turn off your computer and disconnect it from the electrical outlet for a few hours; then reconnect the computer, turn it on, and enter system setup (see Entering System Setup). If the date and time are not correct in system setup, replace the battery.

You can operate your computer without a battery; however, without a battery, the configuration information is erased if the computer is turned off or unplugged from the electrical outlet. In this case, you must enter system setup (see Entering System Setup) and reset the configuration options.

WARNING: A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.

To remove the battery:

1.If you have not already done so, make a copy of your configuration information, found in system setup.

2.Follow the procedures in Working on Your Computer.

3.Remove the computer cover.

4.Locate the battery socket.

CAUTION: If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the object. Ensure that the object is inserted between the battery and the socket before you attempt to pry out the battery. Otherwise, you may damage the system board by prying off the socket or by breaking circuit traces on the system board.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector while removing the battery.

5.Remove the system battery.

a.Support the battery connector by pressing down firmly on the positive side of the connector.

b.While supporting the battery connector, press the battery tab away from the positive side of the connector and pry the battery it up out of the securing tabs at the negative side of the connector.

Page 10
Image 10
Dell 760 manual Replacing the Battery

760 specifications

The Dell OptiPlex 760 is a highly regarded desktop computer that caters primarily to business environments. Released as part of Dell’s OptiPlex series, the 760 is designed for efficiency, reliability, and performance, making it a suitable choice for organizations looking for a dependable workstation.

One of the standout features of the Dell 760 is its versatility in form factor. It is available in mini-tower, desktop, and ultra-small form factor configurations, offering options that can fit various workspace requirements. This adaptability ensures that businesses can tailor their desktop setup based on space constraints or specific usage scenarios.

Powering the Dell 760 is an Intel Core 2 Duo processor, which provides a competent level of performance for typical office applications, multitasking, and data processing tasks. The system supports a wide range of processors, with options available for both dual-core and quad-core configurations, delivering the necessary horsepower for demanding applications.

In terms of memory, the OptiPlex 760 supports up to 8GB of DDR2 RAM, allowing for adequate multitasking capabilities. The inclusion of ample RAM helps improve the overall responsiveness of the system, making it perfect for business applications that require quick access to data and smooth operation.

Storage options on the Dell 760 include various hard drive capacities, ranging from 160GB to 500GB SATA HDDs. Additionally, the system can accommodate SSD upgrades for those seeking faster boot times and enhanced data access speeds, further improving efficiency in work environments.

Connectivity is another area where the Dell 760 excels. The desktop features a range of ports, including USB 2.0, VGA, and optional DisplayPort outputs, enabling users to connect multiple peripherals and displays easily. Integrated Ethernet allows for seamless network connections, which is crucial for businesses that rely on online connectivity and network sharing.

Another important characteristic of the Dell 760 is its energy efficiency. The system is designed to meet ENERGY STAR certification, making it a responsible choice for businesses looking to reduce their environmental impact and operating costs. This focus on sustainability aligns with modern corporate values, making the Dell 760 a forward-thinking solution.

In summary, the Dell OptiPlex 760 stands out as a reliable and efficient desktop solution for business use. With its range of form factors, powerful Intel processors, ample memory and storage options, extensive connectivity, and energy-efficient design, it remains a solid choice for organizations aiming to enhance their productivity while maintaining cost-effectiveness.