1. Turn on (or restart) your computer.
2. WhentheDELL™logoappears,press<F12>immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft®Windows®desktop. Then shut down your
computer and try again.
3. Select System Setup.
4. Select Security ®Chassis Intrusion and then select the Clear Intrusion Warning option to reset the chassis intrusion detector. Change the setting to
On, On-Silent, or Disabled.
5. Save your BIOS settings and exit system setup.
Back to Contents Page
NOTE: The default setting is On-Silent.