Dell 9150 service manual

Removing and Installing Parts: Dell Dimension 9150 Service Manual

b.Set the retention mechanism aside in a secure location.

4.Use a long Phillips screwdriver to loosen the two captive screws on each side of the heat-sink assembly.

CAUTION: Despite having a plastic shield, the heat-sink assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it.

5. Rotate the heat-sink assembly toward the rear of the computer, and remove it from the computer.

1 heat sink and fan shroud assembly

2 captive screw housing (2)

NOTICE: If you are installing a processor upgrade kit from Dell, discard the original heat sink. If you are not installing a processor upgrade kit from Dell, reuse the original heat sink when you install your new processor.

file:///T/htdocs/systems/dim9150/en/sm/parts.htm[10/31/2012 7:59:36 AM]