|
|
| Some graphics cards require the SERR Message mechanism be disabled. |
Image Server |
|
| |
Lookup Method | Specifies how the ImageServer looks up the server address. | ||
|
| Static IP | |
|
| DNS | |
|
| NOTE: You must set the Integrated NIC to Enable with ImageServer to set the Lookup Method. | |
ImageServer IP | Specifies the primary static IP address of the ImageServer with which the client software communicates. | ||
|
| The default IP address is 255.255.255.255 | |
|
| NOTE: You must set the “Integrated NIC” control in the “System Configuration” group to “Enabled with ImageServer” and when “Lookup Method” | |
|
| is set to “Static IP”. | |
ImageServer | Specifies the primary IP port of the image server with which the client software communicates. | ||
Port |
| The default IP port is 06910 | |
|
| ||
|
| NOTE: You must set the “Integrated NIC” control in the “System Configuration” group to “Enabled with ImageServer”. | |
Client DHCP |
| Specifies how the client obtains the IP address. | |
|
| Static IP | |
|
| DHCP (default) | |
|
| NOTE: You must set the “Integrated NIC” control in the “System Configuration” group to “Enabled with ImageServer”. | |
Client IP |
| Specifies the static IP address of the client. | |
|
| The default IP address is 255.255.255.255 | |
|
| NOTE: To set Client IP you must set Client DHCP to Static IP | |
Client |
| Specifies the subnet mask for the client. | |
SubnetMask |
| The default setting is 255.255.255.255 | |
|
| ||
|
| NOTE: To set Client SubnetMask you must set Client DHCP to Static IP | |
Client Gateway | Specifies the gateway IP address for the client. | ||
|
| The default setting is 255.255.255.255 | |
|
| NOTE: To set Client SubnetMask you must set Client DHCP to Static IP | |
License Status | Displays the current license status. | ||
Post Behavior |
|
| |
Fast Boot | When enabled (default), your computer starts more quickly because it skips certain configurations and tests. | ||
NumLock | Enables or disables the NumLock feature when your computer starts. | ||
LED | When enabled (default), this option activates the numeric and mathematical features shown at the top of each key. When disabled, this option activates | ||
| |||
| the | ||
POST | Allows you to specify the function keys to display on the screen when the computer starts. | ||
Hotkeys |
| Enable F2 = Setup (enabled by default) | |
|
| ||
Enable F12 = Boot menu (enabled by default)
Keyboard Errors
MEBx
Hotkey
Enables or disables keyboard error reporting when the computer starts. This option is enabled by default.
System Logs |
|
BIOS Events | Displays the system event log and allows you to: |
| Clear Log |
| Mark all Entries |
Back to Contents Page
