2 Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
The procedures in this manual require the following tools:
Number 1 magnetized Phillips-head screwdriver
Small flat-blade screwdriver
Small plastic scribe
Microprocessor extractor
'&
(
"
)&(
*+,&*-+.,
+
&-+.
"(
.((&
1. Save any work in progress and close all open application programs.
2. Turn off the computer and any attached peripherals.
NOTE: Make sure the computer is turned off and not in suspend-to-disk or
hibernate mode. If you cannot shut down the computer using the com-
puter’s operating system, press and hold the power button for 4 seconds.
3. If the computer is docked in a C/Dock Family Expansion Station or C/Port
Family Advanced Port Replicator (APR), undock the computer.
4. Disconnect the computer and any attached peripherals from their electrical
outlets to reduce the potential for personal injury or shock. Also disconnect
any telephone or telecommunications lines from the computer.
5. Disconnect all other external cables from the computer.
6. Remove any installed PC Cards or plastic blanks from the PC Card slot.
7. Remove any installed devices in the modular device bay.