26 Dell Latitude CPt V/CPt S Series and CPx H/C Px J Series Service Manual
%,'%) *1. Disconnect the LCD flex cable from the ZIF connector on the inverter.
2. Remove the three 3-mm screws securing the inverter to the top cover.
3. Remove the inverter from the top cover.
%,'%) +1. Remove the 4-mm screw securing the metal cable clip to the left hinge of
the display-assembly top cover.
2. Remove the cable out from under the plastic strain relief retainer located
on the bottom of the display-assembly hinge cover.
3. Remove the flex-cable clip from the bottom of the hinge cover located at
the bottom of the display assembly.
4. Pry the hinge-cover assembly apart from the display assembly, allowing
just enough space for the flex cable to pass through the opening.
5. Slide the cable through the opening.
%,'%) +1. Pry the hinge-cover assembly apart from the display assembly, allowing
just enough space for the flex cable to pass through the opening.
2. Slide the cable through the opening.
3. Attach the flex-cable clip to the bottom of the hinge cover located at the
bottom of the display assembly.
4. Slide the flex cable under the plastic strain relief retainer located on the
bottom of the display-assembly hinge cover.
5. Reinstall the 4-mm screw that secures the metal cable clip to the left hinge
of the display-assembly top cover.
6. Find the manufacturer’s name on the back of the LCD panel that is to be
installed.
=$%
=$