Dell CPt V/CPt S Series, CPx H/CPx J Series instruction

captive screws (3)

3-mm screws (2)

microprocessor shield

4-mm screw (1)

shield brace

(may not apply to your system)

thermal cooling

assembly arm

M2.5x4 M2.0x3

white marks on the microprocessor board (2)

microprocessor module

1.Remove the main battery and secondary battery (if present).

2.Remove the keyboard assembly.

(

3.Remove the two 3-mm screws on the microprocessor shield securing the thermal cooling assembly to the microprocessor module (see Figure 12).

4.Loosen the three captive screws securing the microprocessor shield to the microprocessor module.

18 Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual

Dell CPt V/CPt S Series, CPx H/CPx J Series manual