7.Fold the LCD flex cable at the crease as shown in Figure 17, so that the name of the LCD panel manufacturer faces up. The manufacturer is either Torisan
The connectors are identical on the Torisan and Sharp LCD panels, but they are mounted reverse with respect to each other. This means that pin 1 on the Torisan panel connector is at the opposite end when compared to pin 1 on the Sharp panel connector.
The LCD flex cable can connect to either panel by making one fold to the cable. The words Torisan and Sharp are printed on the cable (see Figure 17). If you are installing a Torisan LCD panel, fold the cable at the crease so the word Torisan is facing up. If you are installing a Sharp LCD panel, fold the cable at the crease so the word Sharp is facing up.
Fold for a Sharp LCD Panel | Fold for a Torisan LCD Panel |
curled back to connect to panel
LCD manufacturer name
crease
crease(underneath) (on top)
31$:(,!
%,'%) *
To replace the
1.Find the manufacturer’s name on the back of the LCD panel that is to be installed.
#=$
#
=$
2.Ensure that the inverter’s configuration jumpers are set correctly (see Figure 18).
If you are installing a Sharp LCD panel, both jumpers are used. If you are installing a Torisan LCD panel, the bottom jumper is used. See the sticker on the inverter shield for more information.
support.dell.com | Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual | 27 |
