support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 23
%&'%) +1. Find the manufacturer’s name, either Samsung or IBM/Hitachi, on the
back of the replacement LCD panel.
2. If your replacement LCD panel is a Samsung — Install the display bezel clip
(if one is not present) by placing the bezel slot over the hinge tab and
pressing gently until it snaps (see Figure 15).
If your replacement LCD panel is an IBM/Hitachi — Remove the display
bezel clip (if present) by gently prying it up with a small-blade screwdriver
(see Figure 15).
*(%)%%!&8!9
3. Install the new flex cable that accompanied the replacement LCD display.
4. Pry the hinge-cover assembly apart from the display assembly, allowing
just enough space for the flex cable to pass through the opening.
5. Slide the cable through the opening.
6. Attach the flex-cable retaining clip to the bottom of the hinge cover located
at the bottom of the display-assembly hinge cover.
7. Slide the flex cable under the plastic strain relief retainer located on the
bottom of the display-assembly hinge cover.
8. Reinstall the 4-mm screw that secures the metal cable clip to the left hinge
of the display-assembly top cover.
bezel clip
hinge tab
display assembly
bezel
bezel slot
bezel hinge