32 Dell Latitude CPt V/CPt S Series and CPx H/C Px J Series Service Manual
)+
-+.+
&-+."(
"
1. Remove the main battery and secondary battery (if present).
2. Remove the device from the modular bay (if present).
3. Remove the keyboard assembly.
4. Remove the display assembly.
5. Remove the palmrest assembly.
6. Turn the palmrest assembly over.
7. Remove the two 4-mm screws securing the palmrest bracket. This may
loosen the reserve battery EMI spring clip which is secured to the palmrest
bracket.
8. Lift the palmrest bracket and turn it over, taking care not to twist the touch-
pad cable.
9. Disconnect the reserve battery cable from the connector on the palmrest
bracket.
10. Remove the reserve battery from the palmrest bracket as follows:
a. Pry the reserve battery free from the foam pad.
b. Remove the remnants of the foam pad from the palmrest bracket.
NOTES: When you replace the reserve batter y, first connect the reserve bat-
tery cable to the connector on the palmrest bracket. Then position the reserve
battery on the palmrest bracket to minimize slack in the cable.
Carefully reposition the reserve battery EMI spring clip before securing the
two 4-mm palmrest bracket screws.