w w w . d e l l . c o m s u p p o r t . d e l l . c o m

3When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your computer (see page 63) and try again.

The Boot Device Menu appears, listing all available boot devices. Each device has a number next to it.

4At the bottom of the menu, enter the number of the device that is to be used for the current boot only.

For example, if you are booting to a USB memory key, highlight USB Flash Device and press <Enter>.

NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.

Changing Boot Sequence for Future Boots

1Enter system setup (see page 114).

2Use the arrow keys to highlight the Boot Sequence menu option and press <Enter> to access the menu.

NOTE: Write down your current boot sequence in case you want to restore it.

3Press the up- and down-arrow keys to move through the list of devices.

4Press the spacebar to enable or disable a device (enabled devices have a checkmark).

5Press plus (+) or minus (–) to move a selected device up or down the list.

120

Appendix

Page 120
Image 120
Dell DCTA, 9150 manual Changing Boot Sequence for Future Boots, 120