1Slide the tab on the left side of the drive-panel insert under the center drive panel tab.

2Rotate the drive-panel insert into place and snap the drive-panelinsert tab over the corresponding tab on the drive panel.

3Ensure that the drive-panel insert is correctly seated in the drive panel.

Replacing the Drive Panel

1Follow the procedures in "Before You Begin" on page 63.

sliding plate lever

sliding plate

drive panel

2Align the drive panel tabs with the side-door hinges.

3Rotate the drive panel toward the computer until the sliding plate lever clicks into place and the drive panel snaps into place on the front panel.

Removing and Installing Parts

91

Page 91
Image 91
Dell 9150, DCTA manual Replacing the Drive Panel