Table 10. Security Screen Options
Option | Function |
|
|
|
|
|
|
|
Supervisor Password Is | Indicates whether a supervisor password has been assigned. |
|
|
|
|
|
|
|
User Password Is | Indicates whether a user password has been assigned. |
|
|
|
|
|
|
|
Set Supervisor Password | Sets and confirms a supervisor password. |
|
|
|
|
|
|
|
Set User Password | Sets and confirms a user password. |
|
|
|
|
|
|
|
Clear User Password | Clears the user password. Settings for this option are Yes or No (default). |
|
|
|
|
|
|
|
|
|
|
Boot Screen
Table 11. Boot Screen Options
Option
Quiet Boot
Quick Boot
Function
Enabled (default) displays the Dell logo. Disabled displays the normal POST messages.
When set to Enabled, this option shortens the POST by eliminating some tests. If set to Disabled (default), all POST tests occur.
Restore on AC/ Power Loss
Determines what state the computer enters when AC power is restored after a power loss. Settings are as follows:
•Last State (default) — Computer returns to the state it was in when power was lost.
•Stays Off — Computer stays off when power is restored; you must press the power button to restore power.
•Power On — Computer starts up when power is restored.
On LAN
On PME
This option controls how the computer responds to a Wakeup On LAN event. The settings for this option are Power On or Stays Off.
This option controls how the computer responds to a PCI power management enabled (PME) wakeup event. The settings for
