10. Replace the drive panel.
11. Replace the computer cover.
12. Connect your computer and devices to their electrical outlets, and turn them on.
CD/DVD Drive

Removing a CD/DVD Drive

1. Follow the procedures in "Before You Begin."
2. Remove the drive panel.
3. Disconnect the power and data cables from the back of the drive.
4. Grasp the sliding plate lever and push it towards the base of the computer; then, hold it in place while you slide the CD/DVD drive from the computer.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
1
data cable
2
power cable