Dell G1 manual +Dugzduhhdwxuhv

‡A secondary cache of 512 KB of static random-access memory (SRAM) included within the single-edge contact (SEC) cartridge, which also contains the microprocessor.

‡System memory that can be increased up to 256 megabytes (MB) by installing 32-, 64-, or 128-MB synchronous dynamic random-access memory (SDRAM) dual in-line memory modules (DIMMs) in the two DIMM sockets on the system board. The system supports nonparity DIMMs. See “Adding Memory” in Chapter 6 for details.

‡Self-Monitoring and Analysis Reporting Technology II (SMART II) support, which warns you at system start-up if your hard-disk drive has become unreliable. To take advantage of this technology, you must have a SMART II-compliant hard-disk drive in your computer. All hard-disk drives shipped with OptiPlex G1 systems are SMART II-compliant.

‡A basic input/output system (BIOS), which resides in flash memory and can be upgraded by diskette, or remotely over a network, if required.

‡Full compliance with PCI specification 2.2.

‡Full Plug and Play version 1.0a capability, which greatly simplifies the installation of expansion cards. Plug and Play support included in the system BIOS allows you to install Plug and Play expansion cards without setting jumpers or switches or performing other configuration tasks. The ISA Configuration Utility (ICU) allows you to configure existing non-Plug and Play ISA expansion cards for conflict-free operation. Also, because the system BIOS is stored in flash memory, it can be updated to support future enhancements to the Plug and Play standard.

‡Wakeup On LAN capability, which, when enabled in the System Setup program, allows the system to be powered up from a server management console. Wakeup On LAN capability also allows remote computer setup, software down- loading and installation, file updates, and asset tracking after hours and on weekends when network traffic is at a minimum. For more information, refer to Chapter 2, “Using the System Setup Program.”

‡Universal Serial Bus (USB) capability, which can simplify connecting peripheral devices such as mice, printers, and computer speakers. The USB connectors on your computer’s back panel, which are enabled by default, provide a single con- nection point for multiple USB-compliant devices. USB-compliant devices can also be connected and disconnected while the system is running.

‡A modular computer chassis with a minimum number of screws for easy dis- assembly and improved serviceability.

+DUGZDUH￿)HDWXUHV

The system board includes the following built-in features:

‡Two 32-bit PCI expansion slots, one shared PCI (32-bit)/ISA (16-bit) expansion slot, and two 16-bit ISA expansion slots.

‡A 64-bit baseline accelerated graphics port (AGP) video subsystem, which includes the ATI Rage II C super video graphics array (SVGA) video controller. This video subsystem contains 2 MB (upgradable to 4 MB) of synchronous graphics

1-2 Dell OptiPlex G1 Midsize Managed PC Reference and Installation Guide