Server Storage | Dell H310, H710P, H810 guide

CAUTION: If you remove any cables other than the ones added to enable redundant path support, the enclosure and disks can get disconnected, and virtual disk may fail.

Perform the following steps to configure the hardware to utilize redundant paths on the PERC H810 card:

1.Set up an enclosure on the PERC H810 card.

2.Connect two SAS cables from the Out ports on your PERC H810 card to the In ports of the external enclosure. For more information, see the following figure.

NOTE: For information on Unified Mode, see the enclosure documentation that was shipped with the enclosure.

3.To add multiple enclosures, cable both Out ports of the first enclosure to both In ports of the next enclosure.

4.After you set up the hardware, the controller detects the redundant paths and automatically utilizes them to balance the I/O load.

Figure 4. Redundant Path Support Configuration With Two Enclosures

1.server

2.storage

Page 29

Image 29

Dell H310, H710P, H810 manual Server Storage, Redundant Path Support Configuration With Two Enclosures

H310, H710, H710P, H810 specifications

Dell offers a range of storage controller technologies, notably the H810, H710, H710P, and H310, which cater to different enterprise needs. These controllers are designed to support various storage configurations, enhancing overall system performance and reliability.

The Dell H810 is a high-performance PCIe 3.0 RAID controller that supports up to eight internal drives and is particularly suited for demanding workloads. It features advanced RAID levels including RAID 0, 1, 5, 6, 10, 50, and 60, providing flexibility for various data protection strategies. The H810 also supports up to 32TB of storage capacity, making it suitable for environments that require substantial data management capabilities.

The H710 is another powerful RAID controller, widely recognized for its balance of performance and cost-efficiency. It features 1GB of cache memory, which aids in accelerating read and write operations. The H710 supports the same RAID levels as the H810 and allows for up to 512MB of non-volatile memory. This ensures data integrity even in the event of a power failure, making it reliable for critical applications.

The H710P is an enhanced version of the H710, with a significant upgrade in its cache capabilities. It offers 2GB of battery-backed cache memory, further enhancing data processing speeds and improving responsiveness. The H710P is ideal for intensive workloads and virtualization, where rapid access to data is essential. This controller also includes features such as RAID storage pooling, intelligent data tiering, and support for multiple virtual disks.

Finally, the H310 is a cost-effective option for small to medium-sized businesses or those with less demanding storage requirements. It offers similar RAID support as the higher-end controllers but operates with a simpler architecture. The H310 features 512MB of cache, providing sufficient performance for regular workloads without the additional complexities of more advanced controllers.

In summary, Dell's H810, H710, H710P, and H310 storage controllers each serve distinct purposes, providing various features, technologies, and performance characteristics tailored to different business needs. From high-capacity storage solutions to user-friendly setups, Dell’s offerings ensure that organizations can efficiently manage their data storage requirements.

Contents

H710P, and H810 User’s Guide Dell Inc. All Rights Reserved Contents Deploying The Perc Card Driver InstallationSupport For Internal Multiple Controllers Management Applications For Perc Cards CacheCade Security Key And RAID Management Security Key Management In The Bios Configuration UtilityTroubleshooting Appendix RAID Description Multiple Disks Become InaccessibleSource Disk Fails During Replace Member Operation Disk Mirroring Overview Specification H310 H710 H710P Supported Operating Systems Specification H310 H710 H710P H810Getting Help Spans per Disk Group Documentation Feedback Contacting DellRelated Documentation Page Physical Disk Power Management FeaturesConfigured Spin Down Delay There are four power saving modes available Consistency Checks Types Of Virtual Disk InitializationBackground Initialization Of Virtual Disks Full Initialization Of Virtual Disks Configuring FastPath-Capable Virtual Disks Using Disk RoamingDisk Roaming FastPath Migrating Virtual Disks Virtual Disk MigrationRead Write Conditions Under Which Write-Back Is Employed Virtual Disk Write Cache PoliciesWrite-Back And Write-Through Virtual Disk Read Cache Policies Reconfiguration Of Virtual DisksSource RAID Number Capacity Description Level Mirrored virtual Disk into aDisk by adding One disk Smart Feature Fault ToleranceAutomatic Replace Member With Predicted Failure Reclaims disk Redundant Path Support For Perc H810 Only Patrol Read Using Replace Member And Revertible Hot Spares Using Persistent Hot Spare SlotsPhysical Disk Failure Detection Physical Disk Hot Swapping Controller Cache Preservation Battery Transparent Learn CyclePage Removing The Perc Controller Deploying The Perc Card Removing and Installing the Perc Adapter PCIe slot SAS cable connectors Perc adapter Screw Removing and Installing the Perc Mini Monolithic Controller Installing The Perc Controller Support For Internal Multiple Controllers Setting Up Redundant Path Support On The Perc H810 Adapter Server Storage Redundant Path Support Configuration With Two EnclosuresPage Click Continue Driver InstallationInstalling a driver Popular support tools section, click Drivers and Downloads Select Install from a list or specific location Reboot the system when promptedUpdating The Linux Driver Click on the Hardware tab Upgrading The Kernel Version installed Page Entering The Bios Configuration Utility Bios Configuration UtilityManagement Applications For Perc Cards Dell OpenManage Storage Management To exit the Bios Configuration Utility Ctrl R Exiting The Configuration UtilityMenu Navigation Controls Notation Meaning and Use Example Notation Meaning and Use Setting Up Virtual DisksCtrl Mgmt, and Foreign View Mgmt, Ctrl Mgmt, and Foreign View Summary Of RAID Levels Parameter Description Creating Virtual Disks Virtual Disk ManagementParameterDescription Select Create New VD and press Enter Converting Physical Disk To RAID Capable For Perc H310 Selecting Virtual Disk Parameters Initializing Virtual Disks Converting Physical Disk To Non-RAID For Perc H310Checking Data Consistency Running a Data Consistency CheckPage Page Choose Break Mirror and press Enter Break MirrorManaging Preserved Cache Select Manage Ded. HS and press Enter Managing Dedicated Hot SparesSelect Manage Preserved Cache Select Clear Config Clearing The ConfigurationDeleting Virtual Disks Deleting Disk Groups Virtual Disks Physical Disks Bios Configuration Utility Menu OptionsVirtual Disk Management VD Mgmt Security property of the Disk Group Virtual Disks Action Description Virtual Disk Actions Physical Disk Actions Physical Disk Management PD Mgmt Controller Management Actions RebuildController Management Ctrl Mgmt Physical Disk Management Foreign Configuration ViewSetting LED Blinking Replacing An Online Physical Disk Creating Global Hot SparesRemoving Global Or Dedicated Hot Spares Performing a Manual Rebuild Of An Individual Physical Disk Restrictions and LimitationsStopping Background Initialization Enabling Boot Support For a BIOS-Enabled Controller Enabling Boot SupportEnabling Bios Stop On Error Controller Management Restoring Factory Default Settings Uefi RAID Configuration UtilityEntering The Uefi RAID Configuration Utility Disabling Auto Import Configuration Options Exiting The Uefi RAID Configuration UtilityDevice Settings menu Controller Management Menu Enclosure Management Virtual Disk ManagementPhysical Disk Management Menu CacheCade CacheCade Virtual Disk CharacteristicsConfiguring And Managing CacheCade Virtual Disks Select Create CacheCade Virtual Disk and press Enter CacheCade Virtual Disk ManagementCreating CacheCade Virtual Disks Automatic Reconfiguration Of CacheCade Virtual Disks Reconfiguring CacheCade Virtual DisksDeleting CacheCade Virtual Disks Manual Resizing Of CacheCade Virtual DisksPage Security Key And RAID Management Security Key Management In The Bios Configuration UtilitySecurity Key Implementation Local Key Management LKM Changing The Security Key Creating a Security Key Securing Pre-Existing Virtual Disks Deleting a Security KeyCreating Secured Virtual Disks Highlight the Secure Disk Group option and press Enter Instant Secure Erase Troubleshooting Security Key ErrorsSecured Foreign Import Errors Failure To Instant Secure Erase Task On Physical Disks Failure To Delete Security Key Bios Error Messages TroubleshootingDiscovery Error Message Extra Enclosure Error Message Missing Virtual Disks Error Message Missing Disks In Virtual Disk Error MessagePrevious Configuration Of Disks Removed Error Message Drive Configuration Changes Error Message Dirty Cache Data Error MessageBios Disabled Error Message Virtual Disks Offline Error Message Adapter At Baseport Not Responding Error MessageVirtual Disks Degraded Error Message Action Cable problems, press any key or Y to continue Memory Or Battery Problem Error Message Virtual Disks Partially Degraded Error MessageFirmware Fault State Error Message Foreign Configuration Found Error Message Previous Configuration Cleared Or Missing Error Message Foreign Configuration Not Found In Ctrl R Error MessageInvalid SAS Topology Detected Error Message Multibit ECC Errors Detected Error Messages Degraded State Of Virtual Disks Configured Disks Removed Or Not Accessible Error MessageBattery Discharged Or Disconnected Error Message General Issues Memory ErrorsPreserved Cache State Perc Card Has Yellow Bang In Device Manager Unable to Rebuild a Fault Tolerant Virtual Disk Physical Disk IssuesFatal Error Or Data Corruption Reported Physical Disk In Failed State Virtual Disk Fails During Rebuild Using a Global Hot Spare Multiple Disks Become InaccessibleRebuilding a Failed Physical Disk Virtual disk Physical Disk Takes a Long Time To Rebuild Smart ErrorsVirtual Disk Fails Rebuild Using a Dedicated Hot Spare Linux Operating System Errors Replace Member ErrorsIssue General disk fails Corrective Error Install a DKMS-enabled driver package Unable To Register Scsi Device Error MessageReboot to the new kernel Driver Does Not Auto-Build Into New Kernel Activity LED Status LED Disk Carrier LED Indicators Summary Of RAID Levels Appendix RAID DescriptionRAID Terminology Disk Striping Parity Data Disk MirroringSpanned RAID Levels Example of Distributed Parity RAID

Dell H310, H710P, H810 Server Storage, Redundant Path Support Configuration With Two Enclosures

Models: H310 H710 H710P H810

Figure 4. Redundant Path Support Configuration With Two Enclosures

1.server

2.storage

H310, H710, H710P, H810 specifications