Display Assembly | 37
Replacing the Display Assembly
Procedure
1Place the display assembly in position and replace the screws that secure the
display assembly to the computer base.
2Route the display cable through the routing guides and connect the display cable
to the connector on the system board.
3Adhere the tape that secures the display cable to the system board.
4Connect the antenna cables to the connectors on the Mini-Card.
Postrequisites
1Replace the palm rest. See "Replacing the Palm Rest" on page 31.
2Replace the base cover. See "Replacing the Base Cover" on page 18.
3Replace the keyboard. See "Replacing the Keyboard" on page 16.
4Replace the battery. See "Replacing the Battery" on page 13.
5Follow the instructions in "After Working Inside Your Computer" on page 9.
Removing the Display Bezel
Prerequisites
1Remove the battery. See "Removing the Battery" on page 13.
2Remove the keyboard. See "Removing the Keyboard" on page 15.
3Remove the base cover. See "Removing the Base Cover" on page 17.
4Remove the palm rest. See "Removing the Palm Rest" on page 27.
5Remove the display assembly. See "Removing the Display Assembly" on page 35.
book.book Page 37 Thursday, April 12, 2012 10:14 AM