Procedure
1Disconnect the antenna cables from the connectors on the
2Peel the tape that secures the display cable to the system board and then disconnect the display cable from the connector on the system board.
3Make a note of the display cable routing and remove the cable from the routing guides.
4Remove the screws that secure the display assembly to the computer base.
5Lift the display assembly off the computer base.
5
1
2
4
3
1 | display assembly | 2 | screws (6) |
|
|
|
|
3 | tape | 4 | display cable |
|
|
|
|
5 | antenna cables (2) |
|
|
|
|
|
|
36 Display Assembly
