3Lift the Mini-Card out of the connector on the daughter board.
CAUTION: When the Mini-Card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against Electrostatic Discharge" in the safety information that shipped with your computer.
Replacing the Mini-Card
Procedure
1Remove the new Mini-Card from its packaging.
2Align the notch on the Mini-Card with the tab on the connector on the daughter board.
CAUTION: Use firm and even pressure to slide the Mini-Card into place. If you use excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the Mini-Card and on the daughter board, and realign the Mini-Card.
CAUTION: To avoid damage to the Mini-Card, never place cables under the wireless Mini-Card.
3Insert the Mini-Card connector at a 45-degree angle into the connector on the daughter board.
