7. control module 0
Figure 12. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS6510 Storage Array
1. cluster node 1 | 5. Dell EqualLogic PS6510 storage system |
2. cluster node 2 | 6. control module 1 |
3. switch 0 | 7. control module 0 |
4. switch 1 |
|
Cabling The Dell EqualLogic PS5000/PS5500 Storage Arrays
1.Connect a network cable from the network switch 0 to Ethernet 0 on the control module 1.
2.Connect a network cable from the network switch 0 to Ethernet 1 on the control module 1.
3.Connect a network cable from the network switch 1 to Ethernet 2 on the control module 1.
4.Connect a network cable from the network switch 1 to Ethernet 0 on the control module 0.
5.Connect a network cable from the network switch 1 to Ethernet 1 on the control module 0.
6.Connect a network cable from the network switch 0 to Ethernet 2 on the control module 0.
7.Repeat steps 1 to 6 to connect the additional Dell EqualLogic PS5000/PS5500 storage array(s) to the iSCSI switches. For more information, see the figures below.
20
