Problem | Probable Cause | Corrective Action |
The storage array firmware upgrade process using Telnet, exits without allowing you to enter y to the following message:
Do you want to proceed (y/n)[n]:
The Telnet program sends an extra line after you press <Enter>
User serial connection for the array firmware upgrade.
To clear the extra linefeed in Windows Telnet:
1.Enter ^](control, right bracket).
2.In the Microsoft Telnet prompt, type unset crlf.
3.Press <Enter> to return to Telnet.
While running the Cluster Validation Wizard, the Validate IP Configuration test detects that two iSCSI NICs are on the same subnet and a warning is displayed.
The two iSCSI NICs are configured in No action required. the same subnet by design.
46
