Dell ISCSI manual For more information, see the figures below

NOTE: You can use only one of the two 10 Gb Ethernet ports on each control module at a time. With the 10GBASE-T port (left Ethernet 0 port), use CAT6 or better cable. With the SFP+ port (right Ethernet 0 port), use fiber optic cable acceptable for 10GBASE-SR or twinax cable.

For more information, see the figures below.

Figure 7. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS4110 Storage Array

1. cluster node 1	5. Dell EqualLogic PS4110 storage system
2. cluster node 2	6. control module 0
3. switch 0	7. control module 1
4. switch 1

Figure 8. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS6110 Storage Array

17