Dell KH934 Security Options Description Chassis Intrusion, On-Silent default, Intrusion Alert

Table 2-6. Security Options (continued)

Option	Description
Chassis Intrusion	Enables or disables the chassis-intrusion detection feature. When set to
(On-Silent default)	On-Silent, chassis intrusion is detected but no warning message is
	reported during start-up. When set to On, this field displays
	DETECTED when the chassis cover has been opened. Pressing any edit
	key acknowledges the intrusion and arms the system to look for further
	security breaches. Off disables the chassis-intrusion detection feature.
Intrusion Alert	If an intrusion has been detected, press the <Enter> key to acknowledge
	the intrusion and arm the system to look for further security breaches.
Execute Disable	Specifies whether or not Execute Disable Memory Protection Technology
(On default)	is On or Off.
Table 2-7. Power Management Options
Option	Description
AC Recovery	Determines how the system responds when AC power is re-applied after a
(Last default)	power loss. Off commands the system to stay off when the power is re-

applied. You must press the front-panel power button before the system turns on. On commands the system to turn on when the power is re- applied. Last commands the system to return to the last power state the system was in just before it was turned off.

Auto Power On

(Off default)

Determines when to use the Auto Power Time setting to turn on the system. Off commands the system to not use the Auto Power Time feature. Everyday turns on the system every day at the time set in Auto Power Time. Weekdays turns on the system every day from Monday through Friday at the time set in Auto Power Time.

Auto Power Time	Determines the time that you want the system to turn on.
Low Power Mode	On conserves more power by removing power from most hardware
(Off default)	features. Off conserves less power and removes power from fewer
	hardware features.
	NOTE: With this option set to On, the integrated NIC will be disabled when
	the system is in the Hibernate or Off states. Only add-in NICs will be able to
	wake the system remotely.
Remote Wake Up	Determines how the system is turned on remotely from the Suspend,
(Off default)	Hibernate, or Off states. Off disables the NIC from waking up the
	system. On enables the NIC to wake up the system. On w/ Boot to NIC
	enables the NIC to wake up the system and boot from the network.
	NOTE: If you want the system to perform a Remote Wake Up, you must first
	set Low Power Mode to Off.

Using the System Setup Program

33