Dell KH934 owner manual Panel Assembly Service Only Parts Procedure, Replacing the Bezel

Figure 3-21. Removing the Bezel

1

2

1 bezel release screws (3) 2 bezel

Replacing the Bezel

1Align the bezel with the chassis frame and slide it into position.

2Attach the three bezel release screws to secure the bezel to the system chassis. See Figure 3-21.

3Replace the processor fan. See "Replacing the Cooling Fans" on page 67.

4Reinstall the heat sink and shroud assembly. See "Replacing the Processor" on page 65.

5Close the system. See "Closing the System" on page 41.

6Reconnect the system to the electrical outlet, and turn on the system.

I/O Panel Assembly (Service Only Parts Procedure)

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

74

Installing System Components