Removing the Display Panel
1.Follow the instructions in Before You Begin.
2.Remove the display assembly (see Removing the Display Assembly).
3.Remove the display bezel (see Removing the Display Bezel).
4.Disconnect the camera cable from the connector on the camera module.
5.Remove the eight screws that secure the display panel to the display back cover.
6.Note the routing of the
7.Note the routing of the display cable and remove it from the routing guide on the hinge.
8.Lift the display panel off the display back cover.
1 | camera cable connector | 2 | screws (8) |
3 | display | 4 | hinges (2) |
|
|
|
|
Replacing the Display Panel
1.Follow the instructions in Before You Begin.
2.Place the display panel over the display back cover.
3.Connect the camera cable to the connector on the camera module.
4.Route the display cable through the routing guide on the hinge.
5.Route the
6.Replace the eight screws that secure the display panel to the display back cover.
7.Replace the display bezel (see Replacing the Display Bezel).
8.Replace the display assembly (see Replacing the Display Assembly).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.