Dell L401X Removing the Camera Module Replacing the Camera Module, Back to Contents Page

Back to Contents Page

Camera Module

Dell™ XPS™ L401X Service Manual

Removing the Camera Module

Replacing the Camera Module

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

Removing the Camera Module

1.Follow the instructions in Before You Begin.

2.Remove the battery (see Removing the Battery).

3.Remove the memory module(s) (see Removing the Memory Module(s)).

4.Remove the Mini-Card(s) (see Removing the Mini-Card(s)).

5.Remove the hard drive (see Removing the Hard Drive).

6.Follow the instructions from step 4 to step 6 in Removing the Optical Drive.

7.Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).

8.Remove the keyboard (see Removing the Keyboard).

9.Remove the display assembly (see Removing the Display Assembly).

10.Remove the display bezel (see Removing the Display Bezel).

11.Remove the display panel (see Removing the Display Panel).

12.Gently peel the aluminum foil that secures the camera module to the display back cover.

13.Remove the camera module from the display back cover.

1 aluminum foil 2 camera module