Problem (continued) | Possible Solution (continued) |
The image is stretched when | The projector automatically detects the input |
displaying a 16:9 DVD | signal format. It will maintain the aspect ratio |
| of the projected image according to input |
| signal format with a Original default setting. |
| If the image is still stretched, adjust the aspect |
| ratio as follows: |
| • If you are playing a 16:9 DVD, select 4:3 |
| aspect ratio type on your DVD player. |
| • If you cannot select 4:3 aspect ratio type on |
| your DVD player, select 4:3 aspect ratio in |
| the Set Up menu in the OSD. |
|
|
Image is reversed | Select Set Up from the OSD and adjust the |
| projector mode. |
Lamp is burned out or makes a popping sound
When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector does not turn back on. To replace the lamp, see on page 34.
The OSD does not appear on the screen
Try to press the Menu button on the control panel or remote control for 15 seconds to unlock the OSD. Check the Menu Lock on page 27.
The remote control is not operating smoothly or works only within a limited range
The battery may be low. Check if the laser beam transmitted from the remote is too dim. If so, replace with 2 new AAA batteries.
Troubleshooting Your Projector
33
