16 Set up for network printing
www.dell.com/supplies | support.dell.com
Using Windows 98
NOTE: Depending on the software and printers already installed on your computer, your screens
may vary from those in the instructions.
You must install both a USB port driver and a custom print driver.
When you attached the cable and turned on the printer and computer, the Add New
Hardware Wizard sc reen appeared on your compu ter screen.
1Insert the Drivers and Utilities CD, and then click Next.
2Select Search for the best driver for your device (recommended), and then click Next.
3Select CD-ROM drive only, and then click Next.
4After the wizard finds the USB port driver, click Next.
5When the USB port driver is installed, click Finish.
The wizard prompts you to search for new drivers.
6Click Next to search for a printer driver.
7Select Search for the best driver for your device (recommended), and then click Next.
8Select Specify a location only and browse to the location of the printer driver on the
Drivers and UtilitiesCD.
Use the following table to identify the driver for your language.
9Highlight the driver, and then select to install the updated driver (recommended).
10 Click Next.
11 Click Next to complete installation.
If your computer uses
this language Select the driver from the list
(Replace the D:\ in the table with the letter
of your CD-ROM drive)
English D:\DRIVERS\WIN_9X\ENGLISH
French D:\DRIVERS\WIN_9X\FRENCH
German D:\DRIVERS\WIN_9X\GERMAN
Italian D:\DRIVERS\WIN_9X\ITALIAN
Spanish D:\DRIVERS\WIN_9X\SPANISH