Dell N3010 - page 48


2. Place the VGA connector board on the computer base and replace the two screws that secure the VGA connector board to the computer base.

3. Slide the VGA connector cable into the connector on the system board and press down on the connector latch to secure the cable.

4. Replace the middle cover (see Replacing the Middle Cover).

5. Replace the display assembly (see Replacing the Display Assembly).

6. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

7. Replace the keyboard (see Replacing the Keyboard).

8. Replace the memory module(s) (see Replacing the Memory Module(s)).

9. Replace the memory-module cover (see Replacing the Memory-Module Cover).

10. Replace the battery (see Replacing the Battery).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.