Dell N3010 Display Cable


6. Remove the display panel brackets off the display panel.

Replacing the Display Panel Bracket

1. Follow the instructions in Before You Begin.

2. Place the display panel brackets in position.

3. Replace the four screws (two on each side) that secure the display panel brackets to the display panel.

4. Replace the display panel (see Replacing the Display Panel).

5. Replace the display bezel (see Replacing the Display Bezel).

6. Replace the display assembly (see Replacing the Display Assembly).

Display Cable

Removing the Display Cable

1. Follow the instructions in Before You Begin.

2. Remove the display assembly (see Removing the Display Assembly).

3. Remove the display bezel (see Removing the Display Bezel).

4. Remove the display panel (see Removing the Display Panel).

5. Turn the display panel over and place it on a clean surface.

6. Remove the camera module (see Removing the Camera Module).

7. Peel the tape on the display cable and disconnect the display cable from the connector on the display panel.

8. Remove the display cable off the display panel.
1
screws (4)
2
display panel brackets (2)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.