Dell N3010 Display Hinges


Replacing the Display Cable

1. Follow the instructions in Before You Begin.

2. Connect the display cable to the connector on the display panel and replace the tape that secures the display cable to the display panel.

3. Replace the camera module (see Replacing the Camera Module).

4. Turn the display panel over and place it on the display cover.

5. Replace the display panel (see Replacing the Display Panel).

6. Replace the display bezel (see Replacing the Display Bezel).

7. Replace the display assembly (Replacing the Display Assembly).

Display Hinges

Removing the Display Hinges

1. Follow the instructions in Before You Begin.

2. Remove the display assembly (see Removing the Display Assembly).

3. Remove the display bezel (see Removing the Display Bezel).

4. Remove the display panel (see Removing the Display Panel).

5. Push the hinge cap tabs to release it from the display hinge.
1
display cable
2
display cable connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.