Specifications95
a- Exposure to radiofrequency signals
Your wireless handheld portable telephone is a low power radio trans- mitter and receiver. When it is ON, it receives and also sends out radiofre- quency (RF) signals.
In August 1996, The Federal Com- munications Commission (FCC) adopted RF exposure guidelines with safety levels for
•American National Standards In- stitute (ANSI) C95.1 (1992)
•National Council of Radiation Pro- tection and Measurement (NCRP) Report 86 (1986)
•International Commission of Non- Ionizing Radiation Protection (IC- NIRP) 1996
•Ministry of Health (Canada) Safety Code 6
Those standards were based on com- prehensive and periodic evaluations of the relevant scientific literature.
For example, over 120 scientists, en- gineers, and physicians from univer- sities, government health agencies, and industry reviewed the available body of research to develop the ANSI standard (C95.1).
The design of your phone complies with the FCC guidelines (and those standards). For additional informa- tion concerning exposure to radio frequency signal, see the statement by the FDA at the end of this user guide.
Technical data
GSM class: | 4 (33 dBm - 850 MHz) |
| 1 (30 dBm - |
| 1900 MHz) |
Frequency range: | 824 - 894 MHz |
| 1850 - 1990 MHz |
Weight: | 83 g / 2.96 oz. |
Dimensions: | 101x44/41x21 mm |
| (69 ccm) |
LiIon battery: | 700 mAh |
Operating temper- | 14 °F to 131 °F |
ature: |
|
SIM card: | |
Standby Time: | up to 250 hours |
Talk Time: | up to 5 hours |
Trademarks
CPS is a trademark of Cambridge Positioning Systems Limited.
