Setup71
WAP profile settings
Up to 5 WAP profiles can be set (may be barred by the service provider). The entries may vary depending on your service provider. To set a new profile:
Select profile.
§Edit§ Open menu.
Select profile range and make your settings/en- tries field by field.
§Edit§ The entry card is dis- played.
If necessary, check with your service provider for details:
Profile Enter/change name. name:
WAP Pa- IP address: * Enter IP rameters address.
Port: * Enter port number.
Homepage: Enter homepage (p. 40), if not set by the service provider.
Linger time: Enter time in seconds after which a connec- tion should be ended if no in- put or data exchange takes place.
*) depends on the service provider, if necessary enter 2nd IP address and 2nd port.
CSD set- | ||
tings | number. | |
(Circuit | Call type: Select ISDN or | |
Switched | Analogue. | |
Data) | Login name: Enter login | |
| name. | |
| Password: Enter password | |
| (shown as a series of | |
| asterisks). | |
|
| |
GPRS | GPRS deactivated: Yes/No. | |
settings | APN: Enter the address of | |
(General | ||
your service provider. | ||
Packet | Login name: Enter login | |
Radio | ||
name. | ||
Service) | ||
Password: Enter password | ||
| ||
| (shown as a series of | |
| asterisks) | |
§Save§ | The settings are stored | |
| and the profile list is | |
| shown. | |
| Activate the set WAP | |
| profile (p. 42). |
