Getting Started

13

Charge battery

The battery is not fully charged when delivered. Plug in the charger cable at the bottom of the phone, plug in the power supply unit to the main power socket and charge for at least two hours.

7Display when charging is in progress

Charging time

An empty battery is fully charged af- ter about 2 hours. Charging is only possible in an ambient temperature of 41°F to 104°F (the charge icon flashes as a warning when the tem- perature is 41°F above/below this range). The voltage specified on the power supply unit must not be ex- ceeded.

To use the full performance of the battery, the battery must be fully charged and discharged at least five times.

Charge icon not visible

If the battery is totally discharged no charge icon is displayed when the charger is plugged in. It is displayed after 2 hours at most. In this case the battery is fully charged after 3-4 hours.

Only use the charger provided!

Display while in service

Charge level display during opera- tion (empty-full):

0 3 6

A beep sounds when the battery is nearly empty. The charge level of the battery is displayed correctly only af- ter uninterrupted charging/discharg- ing. You should not remove the bat- tery unnecessarily nor end charging prematurely, if possible.

Note

The charger heats up when used for long periods. This is normal and not dangerous.

Operating times

p. 85

Quality declaration for the battery

p. 86

Page 14
Image 14
Siemens C56 manual Charge battery, Charging time, Charge icon not visible, Display while in service