72Setup
Set HTTP profiles
Up to 5 profiles can be defined (may have been barred by the service pro- vider). The settings have normally been carried out by the service pro- vider in advance. To set a new pro- file:
Select profile.
§Options§ Open menu.
Change settings
Select and confirm.
Select profile range and make your settings/en- tries field by field.
§Edit§ The entry card is displayed.
If necessary, check with your service provider for details:
HTTP pa- | Linger time: Enter time in sec- |
rameters | onds after which a connection |
| should be terminated if no in- |
| put or data exchange takes |
| place. |
|
|
CSD set- | |
tings | number. |
(Circuit | Call type: Select ISDN or An- |
Switched | alogue. |
Data) | Login name: Enter login |
| name. |
| Password: Enter password |
| (shown as a series of aster- |
| isks). |
GPRS settings
(General Packet Radio Service)
§Save§
APN: Enter the address of your service provider.
Login name: Enter login name.
Password: Enter password (shown as a series of aster- isks).
DNS1/DNS 2: (optional)
The settings are stored and the profile list is shown.
Activate the set HTTP pro- file (p. 45).
