Back to Contents Page
Memory-Module Cover
Dell™Inspiron™N3010ServiceManual
Removing the Memory-Module Cover
Replacing the Memory-Module Cover

Removing the Memory-Module Cover

1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Loosen the captive screw that secures the memory-module cover to the computer base.
4. Pry the memory-module cover up and lift it out of the computer base.

Replacing the Memory-Module Cover

1. Follow the instructions in Before You Begin.
2. Align the tabs on the memory-module cover with the slots on the computer base and place the memory-module cover in position.
3. Gently snap the memory-module cover into place.
4. Tighten the captive screw that secures the memory-module cover to the computer base.
5. Replace the battery (see Replacing the Battery).
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for
other Dell computers.
1
captive screw
2
memory-module cover
3
memory-module cover tabs (3)