Dell N7132 manual Post

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Power Light	Problem Description	Suggested Resolution
Solid yellow	The Dell Diagnostics is running a	If the Dell Diagnostics is running, allow the
	test, or a device on the system board	testing to complete.
	may be faulty or incorrectly installed.	Check "Diagnostic Lights" on page 23 to see if
		the specific problem is identified.
		If the computer does not boot, contact Dell
		for technical assistance. For information on
		contacting Dell, see your online User’s Guide.
Blinking yellow	A power supply or system board	Check "Diagnostic Lights" on page 23 to see if
	failure has occurred.	the specific problem is identified. See "Power
		Problems" in your online User’s Guide.
Solid green and a	A problem was detected while the	See "Beep Codes" on page 26 for instructions
beep code during	BIOS was executing.	on diagnosing the beep code. Also, check
POST		"Diagnostic Lights" on page 23 to see if the
		specific problem is identified.
Solid green power	The monitor or the graphics card may	Check "Diagnostic Lights" on page 23 to see if
light, no beep code	be faulty or incorrectly installed.	the specific problem is identified.
and no video during
POST
Solid green power	An integrated system board device	Check "Diagnostic Lights" on page 23 to see if
light and no beep	may be faulty.	the specific problem is identified. If the
code but the		problem is not identified, contact Dell for
computer locks up		technical assistance. For information on
during POST		contacting Dell, see your online User’s Guide.

22

Quick Reference Guide