Small Mini-Tower Computer — Front-Panel Door and Hinge Arms

To prevent damage to your computer, the front-panel door is designed to "break away" if it is lifted up or pushed down too far.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

To reattach the front-panel door:

1. Lower the two hinge arms to the vertical. position

2. Align the two clips on the front-panel door with the hinge arms, and press inward.

To reattach the hinge arms, first remove the front-panel door by gently snapping it off the two hinge arms:

1.Use your fingers to pull here to remove the front- panel insert.

2. Lift both

3. Look through the two view

hinge arms to

slots and align the pivot bar

a horizontal

with the two pivot-bar slots.

position.

 

 

pivot bar

 

pivot-bar slot

Quick Reference Guide

11

Page 11
Image 11
Dell N7132 manual Small Mini-Tower Computer Front-Panel Door and Hinge Arms