Dell PP24L manual a Disconnect the WLAN card from any attached cables

Models: PP24L

1 168
Download 168 pages 50.12 Kb
Page 127
Image 127
a Disconnect the WLAN card from any attached cables.

NOTICE: To prevent damage to the connector, do not use tools to spread the securing clips.

4If a WLAN card is not already installed, go to step 5. If you are replacing a WLAN card, remove the existing card:

a Disconnect the WLAN card from any attached cables.

b Use your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly. c Slide and lift the WLAN card out of its connector.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

NOTE: Do not insert a Mobile Broadband card into the WLAN card slot.

NOTE: The WLAN card may have two or three connectors, depending on the type of card you ordered.

1

2

1 WLAN card

2 metal securing tabs (2)

5To install a WLAN card:

a Move any antenna cables out of the way to make space for the WLAN card.

b Align the WLAN card with the connector at a 45-degree angle, and press the card into the connector until you feel a click.

Adding and Replacing Parts

127

Page 127
Image 127
Dell PP24L manual a Disconnect the WLAN card from any attached cables