Dell R200 - page 27

About Your System 27
SATA Port 0/1/2
hard disk not found SATA Port 0/1/2 set as Auto, no disk installed.
Run the System Setup
program to correct the
settings. See "Using the
System Setup Program" on
page35.
Sector not found
Seek error
Seek operation
failed
Faulty diskette or hard
drive.
See "Troubleshooting a
USB Device" on page102
or "Troubleshooting a Hard
Drive" on page111 for the
appropriate drive installed
in your system.
Shutdown failure Shutdown test failure. Ensure that all memory
modules are properly
installed. See
"Troubleshooting System
Memory" on page108. If
the problem persists, see
"Getting Help" on
page127.
The amount of
system memory has
changed.
Faulty memory module.
Information only, if you
have changed the memory
configuration.
See "Troubleshooting
System Memory" on
page108. If the problem
persists, see "Getting Help"
on page127.
Faulty memory module. See "Troubleshooting
System Memory" on
page108. If the problem
persists, see "Getting Help"
on page127.
Time-of-day clock
stopped Faulty battery; faulty system board.
See "Troubleshooting the
System Battery" on
page106. If the problem
persists, see "Getting Help"
on page127.
Table 1-4. System Messages (continued)
Message Causes Corrective Actions
book.book Page 27 Thursday, August 30, 2007 3:30 PM