Dell R200 - page 59

Installing System Components 59
Figure 3-5. Replacing the Battery
8 Reinstall the riser card. See "Installing the Riser Card" on page80.
9 Install the cooling shroud. See "Installing the Cooling Shroud" on page57.
10 Close the system. See "Closing the System" on page55.
11 Enter the System Setup program to confirm that the battery operates
properly.
12 From the main screen, select System Time to enter the correct time and
date.
Also, re-enter any system configuration information that is no longer
displayed on the System Setup screens, and then exit the System Setup
program.
13 To test the newly installed battery, see "Troubleshooting the System
Battery" on page 106.
1 battery 2 battery socket 3 retention tab
1
2
3
book.book Page 59 Thursday, August 30, 2007 3:30 PM