Installing System Components 85
b
Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c
Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See
Figure 3 -6
.
Installing a Hard Drive Into a Hard-Drive Carrier
1Insert the hard drive into the hard-drive carrier with the connector end
of the drive at the back. See
Figure 3 -6
.
2Align the holes on the hard drive with the back set of holes on the hard
drive carrier.
When aligned correctly, the back of the hard drive will be flush with the
back of the hard-drive carrier.
3Attach the four screws to secure the hard drive to the hard-drive carrier.