Installing System Components 105
Figure 3-12. Installing Optical or Tape Drive Shoulder Screws
7
From the front of the system, align the shoulder screws with the slots in
the chassis and slide the drive into the drive bay until the shoulder screws
snap into place. See Figure3-11.
8
Attach the power and data cables to the drive.
9
Replace the front bezel. See "Installing the Front Bezel" on page86.
10
Close the system. See "Closing the System" on page91.
11
Place the system upright and on its feet on a flat, stable surface.
12
Rotate the system feet outward.
13
Reattach any peripherals and connect the system to an electrical outlet.
14
Turn on the system and attached peripherals.
15
Test the drive by running system diagnostics (optional). See "Running the
System Diagnostics" on page173.
1 shoulder screws (3)
1
book.book Page 105 Tuesday, June 9, 2009 4:09 PM