Dell T410 owner manual Removing a Power Supply Blank, Installing a Power Supply Blank, 123

Models: T410

1 204
Download 204 pages 29.18 Kb
Page 123
Image 123

3Slide the new power supply into the chassis until the power supply is fully seated and the release latch snaps into place. See Figure 3-18.

4Connect the power cable to the power supply and plug the cable into a power outlet.

CAUTION: When connecting the power cable, secure the cable with the Velcro strap.

NOTE: When hot-swapping a new power supply, allow several seconds for the system to recognize the power supply and determine whether it is working properly. The power supply status indicator will turn green to signify that the power supply is functioning properly (see Figure 1-6).

Removing a Power Supply Blank

If you are installing a second power supply, remove the power supply blank in the bay by pulling firmly on the hole in the middle of the blank.

CAUTION: To ensure proper system cooling, the power supply blank must be installed in the second power supply bay in a non-redundant configuration. Remove the power supply blank only if you are installing a second power supply.

Installing a Power Supply Blank

NOTE: A power supply blank must only be installed in the second power supply bay.

To install a power supply blank, align the blank with the power supply bay and insert it into the chassis until it clicks into place.

Removing a Non-Redundant Power Supply

WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system.

1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2Rotate the system feet inward and lay the system on a flat surface.

3Open the system. See "Opening the System" on page 90.

4Remove the cooling shroud. See "Removing the Cooling Shroud" on page 92.

Installing System Components

123

Page 123
Image 123
Dell T410 Removing a Power Supply Blank, Installing a Power Supply Blank, Removing a Non-Redundant Power Supply, 123

T410 specifications

The Dell PowerEdge T410 is a highly regarded tower server that has been designed to meet the needs of small and medium-sized businesses. It offers an optimal combination of performance, scalability, and reliability, making it an ideal choice for various applications, such as file and print services, web hosting, and database management.

One of the standout features of the T410 is its support for Intel Xeon processors. The server is equipped with dual-socket capabilities, allowing users to install up to two powerful Intel Xeon 5500 or 5600 series processors. This dual-processor configuration provides ample power for demanding workloads, ensuring that users can run multiple applications without experiencing performance degradation.

The T410 also excels in memory capability, supporting up to 64GB of DDR3 RAM. With its eight DIMM slots, the server enables users to leverage high-capacity memory modules, which is crucial for handling data-intensive applications. Additionally, the T410 features advanced ECC (Error-Correcting Code) memory, enhancing data integrity and reducing the risk of data corruption.

Storage options for the PowerEdge T410 are diverse and flexible, as it provides up to eight 3.5-inch hot-swappable drive bays. This allows for a variety of configurations, including RAID setups for improved performance and redundancy. The server supports both SATA and SAS hard drives, giving users the choice between cost-effective storage solutions and high-speed options for increased data throughput.

In terms of connectivity, the T410 comes with multiple PCIe slots, enabling users to expand the server's capabilities with additional network cards, graphics cards, or storage controllers. Integrated Gigabit Ethernet ports ensure reliable and speedy network connections, while optional iDRAC (Integrated Dell Remote Access Controller) technology allows for remote management and monitoring of the server's performance.

The T410 is designed with energy efficiency in mind. It incorporates features such as power supply redundancy and energy-efficient cooling systems, ensuring lower operating costs while maintaining high performance.

Overall, the Dell PowerEdge T410 is a robust and versatile tower server that combines powerful processing capabilities, extensive memory support, flexible storage options, and efficient energy usage. With its reliability and scalability, it is well-suited for businesses looking to integrate a dependable server solution into their IT infrastructure.