Dell T410 owner manual Removing an Expansion Card

Models: T410

1 204
Download 204 pages 29.18 Kb
Page 118
Image 118

Removing an Expansion Card

WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2Rotate the system feet inward and lay the system on a flat surface.

3Open the system. See "Opening the System" on page 90.

4Hold the touch points on the expansion card stabilizer and lift the expansion card stabilizer away from the cooling shroud. See Figure 3-14.

5Disconnect any cables connected to the expansion card.

6Remove the expansion card:

a Open the expansion card latch adjacent to the slot. See Figure 3-14.

b Grasp the expansion card by its top corners, and carefully pull the card from the expansion-card connector.

7If you are removing the card permanently, install a filler bracket in the empty card slot.

NOTE: Filler brackets must be installed over empty expansion card slots to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system.

8Hold the touch points and lower the expansion card stabilizer.

9Close the system. See "Closing the System" on page 91.

10Place the system upright and on its feet on a flat, stable surface.

11Rotate the system feet outward.

12Reattach any peripherals and connect the system to an electrical outlet.

13Turn on the system and attached peripherals.

14Remove the card’s device driver from the operating system.

118

Installing System Components

Page 118
Image 118
Dell T410 owner manual Removing an Expansion Card

T410 specifications

The Dell PowerEdge T410 is a highly regarded tower server that has been designed to meet the needs of small and medium-sized businesses. It offers an optimal combination of performance, scalability, and reliability, making it an ideal choice for various applications, such as file and print services, web hosting, and database management.

One of the standout features of the T410 is its support for Intel Xeon processors. The server is equipped with dual-socket capabilities, allowing users to install up to two powerful Intel Xeon 5500 or 5600 series processors. This dual-processor configuration provides ample power for demanding workloads, ensuring that users can run multiple applications without experiencing performance degradation.

The T410 also excels in memory capability, supporting up to 64GB of DDR3 RAM. With its eight DIMM slots, the server enables users to leverage high-capacity memory modules, which is crucial for handling data-intensive applications. Additionally, the T410 features advanced ECC (Error-Correcting Code) memory, enhancing data integrity and reducing the risk of data corruption.

Storage options for the PowerEdge T410 are diverse and flexible, as it provides up to eight 3.5-inch hot-swappable drive bays. This allows for a variety of configurations, including RAID setups for improved performance and redundancy. The server supports both SATA and SAS hard drives, giving users the choice between cost-effective storage solutions and high-speed options for increased data throughput.

In terms of connectivity, the T410 comes with multiple PCIe slots, enabling users to expand the server's capabilities with additional network cards, graphics cards, or storage controllers. Integrated Gigabit Ethernet ports ensure reliable and speedy network connections, while optional iDRAC (Integrated Dell Remote Access Controller) technology allows for remote management and monitoring of the server's performance.

The T410 is designed with energy efficiency in mind. It incorporates features such as power supply redundancy and energy-efficient cooling systems, ensuring lower operating costs while maintaining high performance.

Overall, the Dell PowerEdge T410 is a robust and versatile tower server that combines powerful processing capabilities, extensive memory support, flexible storage options, and efficient energy usage. With its reliability and scalability, it is well-suited for businesses looking to integrate a dependable server solution into their IT infrastructure.