SAFETY: General
SAFETY: When Working Inside Your System
Before you remove the system covers, perform the following steps in the sequence indicated.
CAUTION: Except as expressly otherwise instructed in Dell documentation, only trained service technicians are authorized to remove the system cover and access any of the components inside the system.
NOTICE: To help avoid possible damage to the system board, wait 5 seconds after turning off the system before removing a component from the system board or disconnecting a peripheral device.
1 Turn off the system and any devices.
2 Ground yourself by touching an unpainted metal surface on the chassis before touching anything inside the system.
3 While you work, periodically touch an unpainted metal surface on the chassis to dissipate any static electricity that might harm internal components.
4 Disconnect your system and devices from their power sources. To reduce the potential of personal injury or shock, disconnect any telecommunication lines from the system.
In addition, take note of these safety guidelines when appropriate:
• When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before disconnecting the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, make sure that both connectors are correctly oriented and aligned.
• Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a microprocessor chip by its edges, not by its pins.
Protecting Against Electrostatic Discharge
Electrostatic discharge (ESD) events can harm electronic components inside your computer. Under certain conditions, ESD may build up on your body or an object, such as a peripheral, and then discharge into another object, such as your computer. To prevent ESD damage, you should discharge static electricity from your body before you interact with any of your computer’s internal electronic components, such as a memory module. You can protect against ESD by touching a metal grounded object (such as an unpainted metal surface on your computer’s I/O panel) before you interact with anything electronic. When connecting a peripheral (including handheld digital assistants) to your computer, you should always ground both yourself and the peripheral before connecting it to the computer. In addition, as you work inside the computer, periodically touch an I/O connector to remove any static charge your body may have accumulated.

12

Page 11 Page 13
Page 12
Image 12
Dell UCP-61, UCC-60, UCP-60 manual
Page 11 Page 13

UCP-61, UCP-60, UCC-60 specifications

The Dell UCC-60, UCP-60, and UCP-61 are innovative solutions that enhance collaborative experiences in modern workplaces. These products integrate cutting-edge technologies to facilitate seamless communication and create a dynamic meeting environment.

The Dell UCC-60 is a comprehensive conference camera system designed to optimize video conferencing. It features a 4K ultra-high-definition camera that ensures crystal-clear video quality, promoting a more immersive meeting experience. With a wide-angle lens, the UCC-60 captures all meeting participants, making it ideal for larger teams. The camera’s automatic framing technology intelligently adjusts the view to focus on speakers, enhancing engagement. The UCC-60 also incorporates advanced noise-cancellation microphones that filter out background noise, ensuring that distant participants can hear every word clearly.

On the other hand, the Dell UCP-60 and UCP-61 are designed to complement the UCC-60, focusing on audio solutions and collaboration tools. The UCP-60 offers an all-in-one speakerphone and microphone system that allows for hands-free communication. Its omnidirectional microphone captures audio from all directions, while high-fidelity speakers deliver clear sound. This device is perfect for huddle rooms, as it easily connects to laptops and mobile devices, allowing users to join meetings effortlessly.

The UCP-61 takes audio conferencing a step further with additional features. It supports wireless connectivity, allowing users to connect without the hassle of cables. The UCP-61 is also equipped with touch controls, enabling users to manage calls and adjust volume intuitively. Moreover, both UCP models are designed with portability in mind, making them easily transferable between different meeting spaces within an organization.

In terms of connectivity, these devices support USB-C, USB-A, and Bluetooth, making them compatible with a wide range of devices. Their user-friendly interface ensures that setup is straightforward, minimizing downtime and maximizing productivity.

Overall, Dell's UCC-60, UCP-60, and UCP-61 reflect the company’s commitment to fostering an effective, collaborative environment. Their integration of high-quality video, superior audio technology, and ease of use make them essential tools for any modern workspace, whether in-person or remote. As organizations continue adapting to hybrid work models, these solutions will play a crucial role in keeping teams connected and engaged.
Top Page Image Contents