Installing and Configuring Hardware 51
Figure 4-7. Removing the PERC 6/E Adapter
NOTE: For more information on removing peripherals installed in the system’s
PCI-E slots, see the Hardware Owner’s Manual that shipped with the system.
5
For removing a PERC 6/i adapter, determine whether the dirty cache LED
on the controller is illuminated.
If the LED is illuminated, replace the system cover, reconnect the
system to power, turn on the system, and repeat step1 and step 2. See
Figure4-8.
NOTE: The location of the PERC 6/i varies from system to system. For
information on PERC 6/i card location, see the Hardware Owner’s Manual that
shipped with the system.
If the LED is not illuminated, continue with the next step.
1 battery 3 PERC 6/E adapter
2 memory module 4 bracket screw
3
1
4
2
Dell_PERC6.1_UG.book Page 51 Wednesday, April 15, 2009 4:18 PM