Dell UCP-60, UCP-61, UCC-60 manual Click on the Hardware tab, Device Manager screen appears

Models: UCP-61 UCP-60 UCC-60

1 156
Download 156 pages 12.96 Kb
Page 68
Image 68

8Click Next.

9The wizard detects and installs the appropriate device drivers for the new RAID controller.

10Click Finish to complete the installation.

11Reboot the system when prompted.

Updating an Existing Windows Server 2003, Windows Server 2008, Windows XP, or Windows Vista Driver

Perform the following steps to update the Microsoft Windows driver for the PERC 6 controller already installed on your system.

NOTE: It is important that you close all applications on your system before you update the driver.

1Select Start→ Settings→ Control Panel→ System. The System Properties screen appears.

NOTE: For systems running a Windows Server 2003 operating system, click StartControl PanelSystem.

2Click on the Hardware tab.

3Click Device Manager.

The Device Manager screen appears.

NOTE: An alternative method is to open Device Manager. In Windows Explorer, right click My ComputerManage. The Computer Management window launches. Select Device Manager.

4Double-click on SCSI and RAID Controllers.

NOTE: In Windows 2008 and Windows Vista, PERC is listed under Storage Controllers.

5Double-click the RAID controller for which you want to update the driver.

6Click the Driver tab and click Update Driver.

The Upgrade Device Driver Wizard screen appears.

7Make the driver files available with the USB key or other media.

8Select Install from a list or specific location.

9Click Next.

68

Installing the Drivers

Page 68
Image 68
Dell UCP-60, UCP-61, UCC-60 manual Click on the Hardware tab, Device Manager screen appears