Dell UCC-60, UCP-61, UCP-60 manual Press Insert again. a path is displayed

Models: UCP-61 UCP-60 UCC-60

1 156
Download 156 pages 12.96 Kb
Page 76
Image 76

Installing or Updating the NetWare Driver in an Existing NetWare System

Perform the following steps to add the Novell NetWare driver to an existing installation:

1At the root prompt, type hdetect and press <Enter>. The Configuration Options screen is displayed.

2From the screen that displays, go to the Storage Adapter screen to install the MegaRAID SAS driver.

3Delete any existing RAID adapter listings.

4Press <Insert> to add unlisted drivers.

5Press <Insert> again. A path is displayed.

6Press <F3>.

7Insert the driver diskette into the diskette drive, and press <Enter>. The system finds the .HAM driver.

8Press <Tab>.

9Select the Driver Summary screen, and press <Enter>.

10Continue the Novell NetWare installation procedure.

76

Installing the Drivers

Page 76
Image 76
Dell UCC-60, UCP-61, UCP-60 manual Press Insert again. a path is displayed